|
CP
90 Pre-Clean - One of our most popular
products. This is an excellent cleaner for all acrylic finishes.
Works fast to remove silicones, wax, grease, tar and other contaminants.
Flashes quick, leaving no residue.
|
|
| CP
91 Wax & Grease Remover - This product
is slower evaporating than our CP90 but may leave a residue. Dry
thoroughly and follow with a thorough cleaning using CP90. Wax
and Grease Remover is best for removing wax, grease , tar and
other contaminants prior to body repair. Not recommended as a
pre-clean prior to paint. |
 |
| CP
92 Plastic and Fiberglass parts Cleaner- This
product is a premium mold release agent cleaner for plastic and
fiberglass parts that also helps eliminate static charge. |
 |
| CP
905 Water Base Pre-Clean- CP 905 is
an excellent alternative to solvent based pre-cleans. CP 905 more
effectively removers handprints, salts, and fats from surfaces
to be refinished. |
 |
| CP
100 Gun Clearner- CP100 gun wash solvent
is formulated to effectively clean even the toughest urethane
paints. This formula has sufficient retarders to slow down the
evaporation often associated with gun cleaners. Also included
in this formula is an additive that will prevent catalyzation,
thus protecting expensive equipment. CP 101 is an economical alternative
gun cleaner that is faster evaporating than CP 100. Due to the
faster evaporation rate, product will have to be replaced more
often. CP 101 has great cutting power and there is no need to
add a Power Additive or Catalyst Neutralizer with this product.
As with our other products, this is 100% virgin material. |
|
| CP
105 Catalyst Neutralizer- This product
is never needed for CP 100, but if you have another gun wash solvent
in your tank that is clogging up your equipment, just add CP 105
to prevent it from occurring again. |
 |
| CP
106 Power Additive- When using a "cheap
wash thinner" for your gun wash solvent, add CP 106 to make
a stronger cleaner. |
 |
| CP
1000 Acetone- This widely used solvent
is very strong and evaporates very fast. In addition to reducing
paint, it is excellent for cleaning glue. |
 |
| CP
1001 Mineral Spirits - This very popular
solvent is slow to evaporate and is low in strength. It is often
used to thin house paints. It is excellent for industrial applications
when low strength is desired. |
 |
| CP
1002 MEK - Similar to Acetone, but not
quite as strong and it does not evaporate as fast. |
 |
| CP
1003 Toluene - Although it is widely
used as a solvent, Toluene has low strength and is excellent for
dissolving many synthetic resins. It is one of the main ingredients
in lacquer and has a high rate of evaporation. |
 |
| CP
1004 Xylene - Similar to Toluene in
strength but with a slower evaporation rate. |
 |
| CP
Methanol - (Methyl Alcohol) Methanol
is not a widely used industrial cleaner. It has more specific
applications than other popular solvents like Acetone, Toluene,
Xylene, MEK and Mineral Spirits. |
|
| CP
1005 Isopropyl Alcohol (IPA) - This
is also an alcohol, buy unlike Methanol, it is non-poisonous.
It is growing in popularity in industry and is often asked for
by name. |
 |
| CP
1007 100 Solvent - A strong, aromatic,
slow-evaporating solvent widely used in industry. |
 |
| CP
1008 VM&P - A widely used solvent.
Can be used when seeking a faster evaporating and weaker product
than CP90. Recommended for final wash prior to paint. |
 |
